Our Clients
Description
Protect 800 Long Range (800 metre) Wireless Driveway Alert System designed to help you monitor and protect your Driveway, Yard, Garden, Home or Business supplied with:
- 1 x Indoor 4-channel Wireless Receiver.
- 1 x Outdoor Wireless PIR with attachable Lens Caps.
- 1 x Outdoor Loud Wired Bell, Switch & 3 metres of Cable.
How it Works:
The Battery powered Weatherproof PIR is designed to be fitted in and around your property monitoring locations such as your:
- Driveway.
- Garden.
- Shed & Garage.
- Fuel Tanks.
- The list is Endless !!.
- The PIR is a single sided Beam which is very easy & quick to Install, there is no lining up with other devices to worry about.
- It will detect movement of both Vehicles & People but is supplied with optional clip on nozzles allowing you to avoid detection of small ground animals such as Fox & Cats.
- When movement is detected a Wireless signal is transmitted up to 800 metres (open air) which equates to around 400 - 600 metres in most applications to the indoor Receiver.
- The Receiver inside the property will play the chosen chime at the chosen volume once the wireless signal is received from the PIR notifying you of the Visitor or Intruder, additional accessories can be added to the Receiver (see further details below).
- The Receiver also has a Loud weatherproof Bell supplied together with 3 metres of cable (which can be lengthened upon request) and a simple switch.
- The Receiver would normally be fitted outside which is ideal for when you are working outside the building or if you want visitors to be aware they have been detected. The simple switch allows you to choose when you want the Bell active.
Additional Detectors can be added to this versatile Alarm System, these include:
- PIR's.
- Vehicle Detectors.
- Gate Contacts.
- Push Buttons.
- Transmitters (for use with other sensors).
- Additional Indoor & Outdoor Receivers can also be added (no limit).
- This Alarm System is very easy to Install, most customers who have a very basic knowledge of DIY will be able to do it.
Receiver:
The Wireless Receiver is packed full of features including:
- 800 metre Wireless Reception.
- Adjustable Volume (from low to approximately 85 decibel).
- 32 optional Melodies.
- Mains Powered using a Plug in Transformer (3-pin UK & 2-pin European supplied).
- Optional Battery Back Up using 4 x AAA Batteries (not supplied).
- LED Notification of Loss of Mains Power.
- Low Battery Notification.
- Up to 16 Detectors can be Used.
- Multiple Receivers can be used (no limit).
- Zone Indicator (visual and by chime).
- 1 x Dry Relay Output (can be used to trigger Diallers, Flashing LED's, Siren's, Bells etc).
- 12v DC Output (can be used to trigger Flashing LED's, Siren's, Bells etc).
- Relay Duration: Momentary.
- 12v DC Output with adjustable Duration (5, 30 & 60 second or 10 minutes).
- Can be Wall or Desk Mounted.
- PIR Battery Check.
- Optional Pause Modes.
PIR:
The PIR is also packed full of features including:
- Impressive 800 metre Wireless Transmission.
- Fully Waterproof.
- Up 15 metres Detection Range (can be further with large objects).
- Adjustable Sensitivity Settings.
- Up to 16 PIR's can be used with any single system.
- Sunshade & Rain Hood.
- Lens size adjusting Caps (ideal to help detect moving vehicles).
- Battery Powered (4 standard AA batteries supplied).
- Low Battery Warning (battery life expected is 9 - 12 months in most applications).
- Battery Status Checking.
- Impressive Vehicle Detection.
- Easy & Quick to Fit.
- Unique choice in operation of:
- 24 hour operation (for use in locations where all day detection is preferred).
- Night Time Operation (for use in locations where you only want a working detector during the hours of darkness).
Lens Caps:
The PIR is supplied with 3 Lens Cap Settings which together with internal adjustments allow you to set the PIR to suit your application, these include:
- Pencil Beam Attachment: Provides a very narrow Beam to avoid small to medium ground animals.
- Medium Beam Attachment: Provides a narrow Beam to avoid most small to medium ground animals whilst detecting Vehicles more efficiently than the Pencil Beam.
- No attachment Fitted: Ideal when the detection of Vehicles is most important to you.
Wired Bell:
- The Loud (85 decibel) Wired Bell is supplied with 3 metres (can be lengthened upon request) of bell cable which would be connected to the 12v output on the Indoor Receiver.
- There is also a simple ON/OFF Rocker Switch fitted onto the cable between the Receiver & Bell which allows you to decide when you want the Outdoor Bell to be active.
- The duration of the Bell is adjustable, options are 5, 10 & 60 seconds or 10 minutes.
- You can also decide which of the 4 channels on the Indoor Receiver will operate this Bell, this allows you to potentially add more PIR's but only have selected PIR's operating the Bell.
- Some customers will purchase an additional Indoor Receiver to locate in a suitable and convenient location for running the cable to the Outdoor Bell, this could be the roof space, spare bedroom, garage or barn etc, they will sometimes plug this second Receiver into a Timer Switch.
Installation Tip:
- We recommend the PIR is fitted looking away from a rising Sun rather than towards it, if this is not possible then care should be taken when choosing the location and direction of the PIR, this basic principle is the same for most outdoor PIR's.
- The PIR's can also easily be hidden inside plastic and wooden structures with some simple imaginative creation to help hide them, the strong 800 metre wireless transmission helps this be possible.
Operational Options:
This Wireless Driveway Alert has the unique feature of being able to use the PIR in two ways:
- 24 hour operation (for use in locations where all day detection is preferred).
- Night Time Operation (for use in locations where you only want a working detector during the hours of darkness).
- This allows you to perhaps have some PIR's working throughout the day on a subtle chime from the Receiver, and other PIR's that only work when it is dark, which would trigger a louder Chime or Siren on the Receiver or on the Outdoor Wired Siren (very flexible).
- You can use as many additional Receivers as needed for your application and up to 16 PIR's.
kit Includes:
Receiver:
- 1 x Protect 800 Driveway Alert Wireless Receiver.
- 1 x Optional Wall Bracket.
- 1 x 3-pin (UK) & 2-pin (EU) Plug in Power Supply.
- 1 x Manual.
- 1 x Siren Transmitter.
- 1 x ON/OFF Rocker Switch.
PIR:
- 1 x Protect 800 Wireless Driveway Alert PIR.
- 4 x AA Batteries.
- 1 x Removable Detection Caps.
- 1 x Sun & Rain Hood.
- 1 x Screwdriver.
- 1 x Set of Screws.
- 1 x Manual.
Bell:
- 1 x Wired Bell.
- 3 x metres of Bell Cable.
Specifications:
Receiver:
- Wireless Operating Range: 800 metres (line of sight).
- Adjustable Volume: Yes (from low to approximately 85 decibel).
- Melody Options: 32.
- Power Supply: 3-pin UK & 2-pin European Transformer Supplied.
- Battery Back Up: Yes 4 x AAA Batteries (not supplied).
- Loss of Mains Power Notification: Yes (LED).
- Low Battery Notification: Yes.
- Maximum Number of Detectors Can Be Used: 16.
- Multiple Receivers can be used: Yes (no limit).
- Zone Indicator: Yes (visual and by chime).
- Dry Relay Outputs: 1 (N/O & N/C Momentary).
- 12v DC Output: Yes (adjustable time 5, 30 & 60 seconds or 10 minutes).
- Relay Duration: Momentary.
- Mounting Method: Wall or Desk Mounted.
- PIR Battery Check: Yes.
- Optional Pause Modes: Yes.
- Input Voltage: 12v DC 500 mA.
- Frequency: 869.400 – 869.650.
PIR:
- Wireless Operational Range: 800 metres (line of sight).
- Weatherproof: Yes.
- Detection Range: Up to 15 metres Detection Range (can be further with large objects).
- Angle of Detection: Approximately 9 - 12 degrees @ 12 metres distance.
- Adjustable Sensitivity Settings: Yes.
- Maximum Number of PIR's: 16.
- Sunshade & Rain Hood: Yes.
- Lens size adjusting Caps: Yes (removable).
- Pencil Beams.
- Narrow Beams.
- Wide Beams.
- Battery Powered: Yes (4 standard AA batteries approximately 9 - 12 months).
- Low Battery Warning: Yes (on receiver).
- Battery Status Checking: Yes (on receiver).
- Vehicle Detection: Yes (best with cap removed).
- Size with Bracket (no sun hood): 85 (D) x 80 (W) x 100 (H) mm.
- Size with Bracket & Sun Hood: 120 (D) x 80 (W) x 100 (H) mm.
- Frequency: 869.400 – 869.650.
- Temperature Range: -20℃ to 50℃.
- Choice in operation of:
- 24 hour operation (for use in locations where all day detection is preferred).
- Night Time Operation (for use in locations where you only want a working detector during the hours of darkness).
Bell Specification:
- Power Supply: 12v DC.
- External: Yes.
- Size: 150 mm Diameter x 60 mm Deep.
- Mounting Bracket: 4 x Holes.
- Volume: Approx 85 Db.
- Cable Length: 3 metres (can be extended upon request @ 50 pence per metre).
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.